SCHURTER AG presents to you EMC information from experts. The event takes place in collaboration with Emerson, Suva, Montena, Rohde & Schwarz, Distrelec, Bytics, Negal, Emtest and Recom.

Details of the event and registration are available on:

http://emv-fachtagung.schurter.ch

SCHURTER AG presents to you EMC-Information from experts. The event takes place in collaboration with its partner companies, Emerson, Suva, Montena , Rohde &Schwarz, Distrelec, Bytics, Negal, Emtest and Recom.

Details of the event and registration are available on:

http://emv-fachtagung.schurter.ch/17-april-2012-rotkreuz

Modern solar inverters, that use MPP (maximum power point) trackers, generate disturbances into both the grid’s AC power line, as well as the DC side of the solar module. An AC filter is normally used on the grid’s AC power line, but the noise generated on the DC side tends to be overlooked. EMC standards EN 61000-6-3 and EN55014-1, however, also put limits on the noise generated from lines not connected to the grid, such as for example the line to the solar panels. Meeting these limits can be achieved by using a DC filter on the DC side of the inverter.

Large solar inverters installed in electrical installations will generally require a cooling system. Components which provide high temperature resistance simplify the system and reduce the energy needed to cool. The FMER SOL filters are designed for rated currents from 25 A to 1500 A at 55°C ambient temperature, and voltages up to 1200VDC.

cURus approval for ambient temperature 55°C and 75°C with reduced current. The filters are cURus approved for the following voltages for types up to 150 A 600 VDC and 1000 VDC for types upwards of 250 A.

The FMER SOL DC filters are designed with screw clamps for types up to 150 A and copper bars for types upwards of 250 A. Other types of connections, such as wires or copper bars <250 A, are available on request. Small adjustments can also be made to the electrical circuit or to the filter housing on request.

Datasheet FMER SOL

New EMC Products

EMC-Products

Selector3-Phase Block Filters

These new compact EMC filters are especially suited for use on TS35 (EN60715) DIN rails in industrial equipment and control systems. The DIN RAIL fixture and fitting concept facilitates simple and time-saving snap-in of the SCHURTER FMAB-, FMBB-, FMAC- und FMAD-filters

The FMAB-, FMBB-, FMAC- and FMAD-RAIL series possess UL-and ENEC Approvals.

Datasheet FMAB Rail

Datasheet FMAC RAIL

Datasheet FMBB RAIL

Datasheet FMAD RAIL

New EMC Products

Single Phase Block Filters

3-Phase Block Filters

EMC Products

The new FMBB NEO Filter series consists of 3 different compact 2-stage filter designs. The 3 filter designs (Design C, Design D and Design F) are characterised by a high symmetrical and asymmetrical attenuation. The FMBB NEO filter Design C attenuates potentially strong conducted interferences. Design D is laid-out for the attenuation of high frequency interferences, whereas the Design F is designed more for low frequency noise attenuation. All designs come up with a high insertion loss performance. The FMBB NEO one phase filter is dimensioned as a 250 VAC filter at a rated current of 1-36 A according IEC and 125/250 VAC, 1-30 A according UL/CSA. The connection to the filter is made by quick connect terminals or with bolts and nuts, style M4. Optional flexible wire leads are available on request.

The compact NEO designed EMI-Filter is intended for use in industrial applications such as frequency converters, stepper motors, UPS-systems, current converters. On request medical versions with leakage currents of < 80μA (M80) respectively < 5μA (M5) are available. The series is ENEC and cURus approved and is qualified for use in equipment according IEC/EN standard 60950.

Datasheet FMBB NEO

Datasheet FMBB NEO medical version

New EMC Products

EMC Products

Single Phase Block Filters

Medical Equipment

The new 5008 series combines an IEC C8 inlet with a line filter for low power applications. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 2.5 A according IEC respectively 6 A according UL and available as standard or medical version. The integrated EMC filtering mounts directly at the point of power entry, ensuring an optimal effect on the electromacnetic compatibility performance of the unit.

Mounting options include screw-on or snap-in mounting. The snap-in mounting technique reduces the assembly costs considerably for reduced handling and ease of assembly. The connection is made with quick-connect terminals. Optional solder terminals are also available.

The unit is designed for use in IT, medical and home applications appliances. The 5008 is the optimal solution, combining uncompromised features and performance with compactness of design to meet the increasing demands in cost efficiencies and ecological concerns. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Datasheet 5008

Datasheet 5008 Med

New EMC Products

EMC-Products

SelectorPower Entry Modules with Filter

Industry_SelectorMedical Equipment

The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed to convert output voltage wave forms produced by PWM frequency converters into low distortion sine wave forms for motor drive and power transformation applications.

The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed for use with 500 VAC installations and currents from 4A upwards. The SCHURTER Sine Wave Filters are suited to a wide variety of applications including frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning systems, traction and conveyer systems.

Datasheet FMAC SINE

Datasheet FMAC SINE DCL

New EMC Products

EMC-Products

Selector3-Phase Block Filters

The FMBC NEO 3-phase filters are arranged for use with 3x 277/480 VAC and 3x 300/520 VAC installations and the FMBD NEO 3-hase filters with neutral are arranged for use with 3x 300/520 VAC intallations. The FMBC NEO filter is available from 7A and the FMBC NEO filter is available from 8A.

These new compact EMC filters in NEO design are especially suited for use in drive systems, engineering installations and places where frequency inverters cause electromagnetic disturbances.

With these new 3-phase power line filters, SCHURTER focuses on effective EMC solutions.

The series has UL Approvals. Approvals to ENEC have been applied for.

Datasheet FMBC NEO

Datasheet FMBD Neo

New EMC Products

EMC-Products

Selector3-Phase Block Filters

SCHURTER presents its new 3-phase line filters, series FMAC ECO and FMBC ECO. These compact and cost optimized filters are in ECO designed and especially suited for use in drive systems, engineering installations and places where frequency inverters cause electromagnetic disturbances.

The EMC filters are arranged for use with 480 VAC installations and are available in single or two stage versions. The FMAC ECO single stage filter is available from 10A, while the two stage

FMBC ECO filter from 8A. The FMBC ECO series has a leakage current of just 5 mA, making it ideal for use in installations equipped with residual current circuit breakers. The filters can be mounted lengthwise or upright which provides maximum flexibility in design.

With these new 3-phase line filters, SCHURTER focuses on costs savings while efficiently solving EMC problems. The series has ENEC approvals. Approvals to cURus have been applied for.

http://www.schurter.ch/pdf/english/typ_fmbc_eco.pdf

SCHURTER extends its portfolio of filters for DC applications with the introduction of series FMEB and FMEC. These filters as especially optimized for DC applications with technical features that support a broad range of applications.

The filters have a current rating of 30 A at 80 VDC. Typical applications are found in DC supplied IT and telecom infrastructures. When used in electrical cabinets of the branch or automation controls for the machine and transportation industries, the filters guarantee a safe operation by attenuating disturbances in the control and communication circuits.

The FMEB filter series is designed for a maximum operating voltage of 80 VDC, while the series FMEC offers connections for two polarities at maximum ±80 VDC.

The primary side is equipped with screw clamps and the secondary side with 6.3 mm x 0.8 quick connect terminals. The aluminum housing offers mounting straps to securely fasten the filter. The FMEB and FMEC filters are approved to ENEC and UL/CSA.

http://www.schurter.com/pdf/english/typ_FMEB.pdf

SCHURTER presents a breakthrough product, providing simple and universal EMC for high frequency applications, using <a href="http://www.x2y.com" target="_blank">X2Y</a>® filter technology. Series 5150 possesses broadband suppression properties to 1 GHz and combines them with the most simple and universal power input. This integrated and compact design provides an easy, safe and cost effective alternative to existing market solutions and opens new opportunities in the filtering of high frequencies.

The SCHURTER 5150 series extends the application range of <a href="http://www.x2y.com" target="_blank">X2Y</a>® filter technology from its origin in EMI protection of DC circuits into the area of AC power input. This filter technology combines the X and Y capacitors used in a typical mains filter into one component. The leads connecting the capacitors are thereby eliminated and parasitic impedances are reduced to a minimum. This results in broadband suppression into high frequency ranges.

The component is equipped with a C14 IEC connector. The double shielding between the <a href="http://www.x2y.com" target="_blank">X2Y</a>® filter and filter casing, together with the broad metal flange can serve as an alternative for feed-through and multi-stage filters. Application examples include equipment for measure-ment engineering, data encryption, medical engineering, IT and telecommunications.

The compact package is designed for front- or rear-side mounting and meets rated currents requirements of up to 10A / 15A. For medical applications, SCHURTER has a version with reduced leakage current. The series has ENEC and cURus approvals, and is suitable for office and medical applications in accordance with IEC/EN 60950 and/or 60601-1.

http://www.schurter.ch/pdf/english/typ_5150.pdf

Schurter’s new 20A IEC inlet with EMI filter, series 5130 ECO design, meets the increasing demands of IT, medical and industrial appliances. The new ECO design provides cost savings and maximum performance in a lightweight and environmentally friendly compact package. The 5130 combines an IEC C20 inlet with line filter in various mounting styles. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding. The units are available with current ratings 20A or 16A, depending on attenuation requirements. In addition to the standard version, medical filters with low leakage currents of <5�?�A, as well as types with X1 and Y1 capacitors for enhanced withstand voltage, are also offered.

Mounting options include a front or rear version for traditional screw and nut mounting or rivet mounting. A version specifically for rear mounting features pre-formed threaded holes for M3 screws, which eliminates the handling of nuts and reduces labor costs. These benefits can also be achieved with the snap-in mounting style. Terminals accept 6.3x0.8 mm quick-connect tabs.

The increasing function and power density of todays IT, medical and industial applications leads to higher energy consumption. The 5130 ECO is the optimal solution, combining uncompromised features and performance with compactness of design to meet this growing demand.

The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

http://www.schurter.ch/pdf/english/typ_5130.pdf

DA22, SCHURTER's latest power entry module (PEM) is built compact and provides maximum electrical power density. The unit offers optimal EMC filter performance, features built-in overload protection and ensures resource-saving mounting.

The DA22 product line, specifically designed for PCB mounting, combines an IEC appliance inlet, a fuse and a filter into one unit. Pre-wired, this product requires only minimal PCB space and can be mounted with very little time required for wiring.

This new PEM integrates EMC filtering and shielding directly at the point of power entry, which has an optimal effect on electromagnetic compatibility. Overload protection is provided by a 1-pole or

2-pole fuseholder for 5x20 fuse links.

The unit is screwed onto the appliance chassis' wall from the inside, the screw-on connection with the printed circuit board ensuring optimal mechanical safety.

DA22 is rated for currents up to 10 A at 125/250 VAC. The entire product line is ENEC and cURus approved and meets the requirements for appliances according to IEC 60950. The versions featuring Extrasafe fuseholders and medical appliance filters are ideally suited to medical appliances according to IEC 60601-1.

http://www.schurter.ch/pdf/english/typ_DA22.pdf

The series combines an IEC C14 or C18 inlet with line filter in various mounting styles. With the addition of the flexible wire and PCB versions SCHURTER has again expanded its range of filtered power entry modules for low and high current applications.

The EMI filter is dimensioned as a 1-stage filter for rated currents up to 15 A with a leakage current standard <0.5 mA and medical <5 μA. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding.

Mounting options include screw-on, rivet or snap-in mounting. The snap-in mounting style as well as the screw-on version from rear side with its pre-formed threaded holes reduces labor costs. The PCB mount version is available with optional snap feet to safely fasten the unit on the printed circuit board. The flexible wire leads provides pre-assembly for easy and fast installation.

The 5120 is designed for use in IT, medical and industrial applications. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Datasheet

New EMC Products

EMC-Products

SelectorPower Entry Modules with Filter

SCHURTER’s IEC C14 inlet with EMI filter, series 5120 ECO design, meets the increasing demands of IT, medical and industrial appliances and is now also available as snap-in mounting version. The new ECO design provides cost savings and maximum performance in a lightweight and environmental-friendly package.

The series combines an IEC C14 or C18 inlet with line filter in various mounting styles. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 15 A with a leakage current standard < 0.5 mA and medical < 5 µA. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding.

Mounting options include screw-on, rivet or snap-in mounting. The new snap-in mounting as well as the screw-on version from rear side with its pre-formed threaded holes reduces labor costs. The connection is made with quick-connect terminals.

The unit is designed for use in IT, medical and industrial applications. The 5120 ECO is the optimal solution, combining uncompromised features and performance with compactness of design to meet the growing demand regarding economy and ecology. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

http://www.schurter.ch/pdf/english/typ_5120.pdf